AFG1 flame treatment unit
We are your complete supplier
for liquid gas fittings and burners
AFG1 flame treatment unit
Environmentally friendly weed control, drying of concrete, slabs and asphalt, de-icing of rails and switches
Series 580
The AFG 1 makes it possible to work in inaccessible places. A 3 or 5 kg propane cylinder can be transported with the back carrier.
| Article | Ø of the burner | Pressure | Consumption | Power | Order no. |
|---|---|---|---|---|---|
Flaming unit AFG1- 40 (without propane bottle) | 40 mm | 1.5 bar | 2.2 kg/h | 27 kW | 5801 |
Flaming unit AFG1- 50 (without propane bottle) | 50 mm | 1.5 bar | 4.0 kg/h | 50 kW | 5802 |
Flaming unit AFG1- 60 (without propane bottle) | 60 mm | 1.5 bar | 6.3 kg/h | 80 kW | 5803 |
| Lorem | Lipsum | Lorem |
Performance and consumption overview
| Pressure | Consumption | Power | |
|---|---|---|---|
Hood 40 | 1.5 bar | 2.2 kg/h | 27 kW |
| | 2.5 bar | 2.8 kg/h | 35 kW |
| | 4.0 bar | 3.5 kg/h | 45 kW |
Hood 50 | 1.5 bar | 4.0 kg/h | 50 kW |
| | 2.5 bar | 5.2 kg/h | 65 kW |
| | 4.0 bar | 6.5 kg/h | 83 kW |
Hood 60 | 1.5 bar | 6.3 kg/h | 80 kW |
| | 2.5 bar | 8.2 kg/h | 105 kW |
| | 4.0 bar | 10.0 kg/h | 133 kW |
| Lorem |
1. function
The propane flows via the economy handle to the main shut-off valve. The valve shuts off the gas supply. When the valve is opened, a certain amount of gas flows through the set bypass. The bypass opening adjustment screw is located just upstream of the main shutoff valve and is sealed in its setting. It releases the gas path for the economy flame. The power flame is released by depressing the lever located below the main shutoff valve. The desired output can be set by depressing the power flame lever and adjusting the main shut-off valve. For safe storage of the burner, there is a stand on the extension tube which allows the burner to be stored in such a way that the pilot flame does not cause any danger.
2. start-up
- connect the regulator with integrated hose rupture safety device (RS) to the gas cylinder valve (the connected load depends on the consumption of the burner),
Connect the burner inlet = G3/8LH (left-hand thread) to the RS with a high-pressure hose 6.3x5 (pressure class 30) (gas-tight) - open the cylinder valve,
- press the start button of the RS,
- open the economy valve completely,
- ignite propane at the burner head,
- press pilot lever = working flame
- set the desired output with the main shut-off valve (propane quantity).
3. decommissioning
- close the main shut-off valve on the burner handle.
- close gas cylinder valve
- vent the propane hose.
4. technical guidelines
ISO 9012, BGV D1, BGV D34, BGV D16, GPSG
5. maintenance
The sealing washer in the screw connection on the inlet side of the RS must be checked for wear and the filter retaining screw must be checked for dirt (see also instructions for regulator and hose rupture protection).
Unauthorized repairs and interventions are not permitted.
Only an expert may change the gas quantity for the flame adjustment. The adjustment screw must be sealed again after the change.
| Article | Order no. |
|---|---|
Back carrier | 1320 |
RS regulator with integrated hose rupture safety device | 2323 |
HD hose 6.3 G3/8LH - G3/8LH 2m | 3232 |
multi wrench | 4901 |
BHB burner handle G3/8LHa | 5403 |
extension 600 | 5416 |
storage foot | 5443 |
burner head 40 | 5541 |
burner head 50 | 5551 |
burner head 60 | 5561 |
operating instructions | 5801.0.99 |
| Lorem |
Borrmann Brenner Berlin GmbH
OT Schöbendorf, Dämmchen 30
15837 Baruth / Mark
Germany